nuliie YM-8806 Manual Del Usuario página 6

NOTE:
If your nipple rubs or feels squeezed in the flange tube,
it indicates an unsuitable flange size. Please replace it
with the correct-size flange.
Assemble the Pump
Step 1
Insert the silicone flange into the breast shield, then insert
the assembled piece into the connector body. Press the
edges with both hands to ensure a tight seal.
Step 2
Insert the suction bowl tightly inside the connector body,
then attach the valve to the bottom of the breast milk
collector.
Step 3
Install the connector body assembly onto the milk collector
and align the positioning line to ensure a firm and correct
connection.
Step 4
Install the main body of the breast pump onto the milk
collector and align the notch under the main body with the
suction bowl. Assemble it downward to fit the milk collector
and ensure a complete seal.
Step 5
Attach the dust cover onto the milk collector to complete
the assembly.
06
English