Publicidad
Idiomas disponibles
Idiomas disponibles
doubt consult the manufacturer.
The recovered refrigerant must be returned to the refrigerant supplier in the correct recovery cylinder, and the
relevant Waste Transfer Note arranged. Do not mix refrigerants in recovery units and especially not in cylinders.
If compressors or compressor oils are to be removed, ensure that they have been evacuated to an acceptable level
to ensure that flammable refrigerant does not remain within the lubricant. The evacuation process must be carried
out prior to returning the compressor to the supplier. Only electric heating to the compressor body shall be used to
accelerate this process. Oil must be drained from systems safely.
Installation
This device can be controlled with the control panel alone or with the remote control.
1. Control panel
2. Louver and air flow control (horizontal)
3. Louver and air flow control (vertical)
4. Castors
5. Handles (both sides)
6. Air filter
7. Air inlet (upper)
8. Drain outlet
9. Air outlet
10. Air inlet (lower)
11. Bottom drain outlet
Temperature ranges
Cooling mode: 17°C to 30°C (62°F to 88°F). Dry mode: 13-35°C (55-95°F). This temperature range indicates the
temperature range this product can operate in. It is not an indication of how it can change the temperature of the
room.
39
Publicidad
