HIKOKI C 3607DB Instrucciones De Manejo página 13

31 Guide fastener wing-bolt
32 Lock spring
33 Guide
34 Guide rail adapter
35 Slots next to base
36 Wing bolt (for attaching guide rail adapter)
37 Spring
Wing bolt (in front for adjustment of guide rail
38
adapter)
Wing bolt (in rear for adjustment of guide rail
39
adapter)
40 Notch of guide bar
41 End of spring plate
42 Guide rail plate
43 Guide rail
44 Rubber lip
45 Lumber
46 Latch
47 Washer (A)
48 Concave side
49 Battery level indicator switch
50 Battery level indicator lamp
51 Display panel
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
C3607DB: Cordless Circular Saw
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
V
Rated voltage
n
0
No-load speed
Switching ON
0
Switching OFF
Disconnect the battery
Prohibited action
High Torque mode is selected
Auto Switch mode is selected
Blower
Warning
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
13
English