Taurus MO20IXD Manual Del Usuario página 9

2.
Install the oven
1. Fix the adjusting screw A on the upper air
tunnel (*) of the oven, and then install the oven
into the cabinet.
2. Adjust the height of the adjusting screw A to
keep 1mm gap between it and the top plane of
cabinet.
- Do not trap or kink the power cord.
- Make sure that the oven is installed in the
center of the cabinet.
3. Open the door; fix the oven to the cabinet with
screw B at the installation hole (**).
4. Then fix the trim-kit plastic cover to the
installation hole (**).
The installation is completed.
Operation Instructions
Clock Setting
When the microwave oven is electrified, the
screen will display "0:00", buzzer will ring once.
1) Press " Kitchen Timer/Clock " twice to select
clock function, the hour figures will flash.
2) Turn the knob to adjust the hour figures, the
input time should be within 0--23.
3) Press " Kitchen Timer/Clock ", the minute
figures will flash.
4) Turn the knob to adjust the minute figures,
the input time should be within 0--59.
5) Press " Kitchen Timer/Clock " to finish clock
setting. ":" will flash, and the time will light.
NOTE:
- The clock will ont work if it'sit is not set when
powered.
- During the process of clock setting, if you press
"Stop/Clear", the oven will go back to the
previous status automatically.
Clock Setting
Press "Microwave", screen will display "P100".
Press "Microwave" for times or turn the knob to
choose the power you want, and "P100", "P80",
"P50", "P30" or "P10" will display for each added
press. Then press. The press
"Start/+30Sec./Confirm" to confirm, and turn the
knob to set cooking time from 0:05 to 95:00.
Press again "Start/+30sec/Confirm" again to start
cooking.
Example:
If you want to use 80% microwave power to cook
for 20 minutes, you can operate the oven as the
following steps.
1) Press " Microwave " once, the screen displays
"P100".
2) Press "Microwave" once again or turn the
knob to choose 80% microwave power.
3) Press "Start/+30sec/Confirm" to confirm, amd
the screem displays "P 80".
4) Turn the knob To adjust the cooking time until
the oven displays "20:00".
5) Press " Start/+30Sec./Confirm " to start
cooking.
NOTE: the step quantities for the adjustment
time of the coding switch are as follow:
0 to 1 min
1 to 5 min
5 to 10 min
10 to 30 min
30 to 95 min
5 seconds
10 seconds
30 seconds
1 minute
5 minutes