Descargar Imprimir esta página

Oase HeatUp 25 Instrucciones De Uso página 11

Ocultar thumbs Ver también para HeatUp 25:

Publicidad

Idiomas disponibles

Idiomas disponibles

Calibrating the unit
• Calibration range: It is possible to calibrate the unit by plus 6 °F (3 °C) and minus 6 °F (3 °C).
• The calibration controller protrudes out of the different-coloured temperature controller. There are
3 fixed positions in the plus and minus range. Each position corresponds to approx. 2 °F (1 °C).
• Do not attempt to go outside the calibration range.
How to proceed:
• Use a screwdriver for the calibration or break the supplied tool out of the holder.
• Measured temperature is too high: Keep the temperature controller at the set value and move the
calibration controller in the direction of - (minus).
• Measured temperature is too low: Keep the temperature controller at the set value and move the
calibration controller in the direction of + (plus).
EN
HUP0006
11

Publicidad

loading

Este manual también es adecuado para:

Heatup 50Heatup 100Heatup 150Heatup 200Heatup 300Heatup 400