Oase HeatUp 25 Instrucciones De Uso página 9

Commissioning/start-up
Switching ON/OFF
CAUTION
Risk of burns from hot surface.

Only switch on the heater when the glass bulb is submerged in water.

Turn the heater off and let it cool down before removing it from the water.
• Wait approx. 30 minutes before switching on so that the thermostat can adjust to the temperature
of the water.
• Route the power connection cable such that it forms a drip loop!
• Switching on: Connect the unit to the power supply.
• Switching off: Disconnect the unit from the power supply.
EN
HUP0002
9