Maintenance and cleaning
If necessary, clean the unit with clear water using a soft sponge or cloth.
• Do not not use cleaning agents or chemical solutions.
Troubleshooting
Malfunction
The water does not heat up. No mains voltage
Water does not reach the
set temperature.
12
Cause
Unit defective
Insufficient water circulation
Unit is not calibrated.
The heating capacity of the unit is
not sufficient with regards to the
ambient temperature or water vol-
ume to be heated up.
Remedy
Check the mains voltage.
Replace unit
Check the temperature.
Calibrate the unit.
Select a suitable unit.