topmark DIAZ Manual De Instrucciones página 15

ASSEMBLING
1. CARRY COT ASSEMBLY
As shown in figure 1/2/3, pull the belts to slot A and B, the metal bars
are in their right position when you hear a click. The carry cot is fully opened as
shown in figure 4.
EN
Tip: place the belts of metal bars inwards for fast disassembly next time.
Assembling inner liner and sunshield:
As shown in figure 5/6/7 : Putt he inner liner into the carry cot, and adjust the inner
liner with the zipper along the carry cot. Then zip the sunshield onto the carry cot as
fig 8/9.
Place the mattress:
As shown on Figure 10, place the mattress onto the bottom of
carry cot, make sure the side with fastening tape face down-
wards.
Open the hood and adaptors:
As shown on fig 11, press button C on both sides of the carry cot simultaneously,
and the adaptor will be unlocked, then pull the aluminium tube D of the hood to-
wards the direction of arrow as shown on fig 12. The hood is opened fully when you
hear a CLICK and the adaptor will be locked automatically as shown on fig. 13.
11
15