cecotec READYWARM 2000 MAX BOX CERAMIC CONNECTED Manual De Instrucciones página 38

ENGLISH
Heating mode
- Press the
mode will operate in a continuous cycle as shown below:
- Comfort mode: press the
- ECO mode: press the
NOTE: by default, ECO mode is set 4 ºC below the Comfort mode temperature.
- Anti-frost mode: the display will show
changed.
- P1/P2/P3: these are the pre-set heating programmes.
Note: if you have not performed the date and time setting or have not completed the setting,
the first time you try to select any of the programmes, you will be asked to set the date and
time before.
- Programme P1: it is a programme that is configured from Monday to Sunday as shown in
the following figure and cannot be configured:
- Programme P2: it is configured from Monday to Friday as shown in the following figure and
cannot be configured:
- Programme P2: it is configured from Saturday to Sunday as shown in the following figure
and cannot be configured:
- Programme P3: it is configured from Monday to Friday as shown in the following figure and
can be configured:
38 READYWARM 2000 MAX BOX CERAMIC CONNECTED
icon to select a mode. Each time the
/ icons to adjust the temperature from 10 °C to 35 °C.
/ icons to adjust the temperature from 6 °C to 31 °C.
. The default temperature is 7 °C and cannot be
icon is pressed, the heating