cecotec READYWARM 2000 MAX BOX CERAMIC CONNECTED Manual De Instrucciones página 39

- Programme P3: it is configured from Saturday to Sunday as shown in the following figure
and can be configured:
P3 programme configuration
1. Press the
2. Press and hold the
3. The screen will display
icons to select the day you want to set, the day code is the same as above. Press the
icon to confirm the day and enter the hour setting.
4. The display will show
frost mode.
5. Press the /
indicated in step 4.
6. Repeat these steps until programming is complete for each time and each day.
Note: after setting the desired mode for the 23rd hour, pressing
daytime setting.
7. When appears on the display, press to confirm all P3 programme settings.
Power setting
Press the button on the remote control to adjust the power:
- Fan mode: will display H0.
- Low mode: will display H1.
- High mode: will display H2.
Timer
The timer can be set in two ways to select the desired switch-off time.
Option A
1. Press the icon, the display will show
icon until the P3 mode is activated, as above.
icon for 3 seconds to enter the day setting.
to tell you that you are setting the day. Press the
, press the
icons to change the time and select the desired mode in each hour as
icon again to select Comfort, ECO, or Anti-
flashing.
READYWARM 2000 MAX BOX CERAMIC CONNECTED
ENGLISH
/
again will return to the
39