Epson TM-L90-i Manual Del Usuario página 13

Steps to fix Errors
While the ERROR LED (J 22) is flashing twice repeatedly,
1. Open the roll paper cover (J 21).
2. Load a roll of paper to use.
3. Close the roll paper cover. The roll paper is fed automatically, the error is
fixed, and the paper layout is set automatically.
Note:
When using black mark die-cut label paper, you may not be able to use the paper normally
even if you follow the steps above. In this case, set the paper layout with the memory switch
setting utility. See the TM-L90-i Technical Reference Guide for details.
See the TM-L90-i Technical Reference Guide also for how to use the product and
detailed product specifications. Go to http://www.epson.jp/dl-sd to download
the memory switch setting utility and TM-L90-i Technical Reference Guide.
Connecting to a Power Source
Note:
It takes approximately 30 seconds after the printer is turned on until it is ready for
printing.
Use the power button (B 2) at the front of the printer to turn the printer on and off.
Make sure the power button is turned off, and connect the dedicated AC adapter
to the printer. See illustration K and L.
Connecting to External Devices
CAUTION:
When connecting external devices to the USB (including Micro-USB)
connectors, follow the precautions below.
• Confirm the rated current of the external devices by checking the
descriptions on the devices or manuals. Connect the external devices
only when those total rated current is less than 2.0 A.
• Use the UL-approved external devices (only for North American users).
When LAN cables are installed outdoors, make sure devices without proper
surge protection are cushioned by being connected through devices that
do have surge protection. Otherwise, the devices can be damaged by
lightning.
When using the printer, make sure the protective cover indicated in the
illustration below fits firmly into place.
Note:
Connecting the optional Wireless LAN Cable Set (OT-WL01) to the USB connector
enables the wireless LAN connection. While connecting via wireless LAN, keep the
Ethernet cable unconnected to the printer.
TM-L90-i User's Manual 6