In Case Of Trouble; About Bluetooth; Resetting This Unit; Resetting This Unit Without Erasing The Data About Phone - Pioneer CD-BTB200 Manual Del Propietário

Section
01 Before You Start
! When using the head units other than
AVH-P7800DVD (Russian model) and AVH-
P6800DVD (Russian model), refer to Using
as an external unit on page 25.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe WARNINGs and CAU-
TIONs in this manual.

In case of trouble

Should this product fail to operate properly,
contact your dealer or nearest authorized
Pioneer Service Station.

About Bluetooth

Bluetooth is a short-range wireless radio con-
nectivity technology that is developed as a
cable replacement for mobile phones, hand-
held PCs and other devices. Bluetooth oper-
ates in 2.4 GHz frequency range and transmits
voice and data at speeds up to 1 megabit per
second. Bluetooth was launched by a special
interest group (SIG) that comprises of Ericsson
Inc., Intel Corp., Nokia Corp., Toshiba and IBM
in 1998, and it is currently developed by nearly
2 000 companies worldwide.
! The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Pioneer Corporation
is under license. Other trademarks and
6
En
Autogood products internet store http://130.com.ua
trade names are those of their respective
owners.

Resetting this unit

CAUTION
Pressing RESET button of this unit with the igni-
tion switch ON (ACC ON) erasing the contents of
the unit's memory.
Resetting this unit without
erasing the data about phone
Pressing RESET button of this unit lets you
reset the unit to its initial settings without
erasing the data about phone. However the
value of the following settings are cleared:
! PHONEBOOK NAME VIEW
! AUTO ANSWER
! REFUSE ALL CALLS
! RING TONE
! AUTO CONNECT
! ECHO CANCEL
When using as an external unit, the value of
the following settings are cleared:
! automatic answering
! automatic connection
! ring tone
This unit must be reset under the following
conditions:
! Prior to using this unit for the first time
after installation
! When this unit and the head unit are re-
connected
! If the unit fails to operate properly
! When strange or incorrect messages ap-
pear on the display
! If there appear to be problems with the op-
eration of the Hands-free Phoning function
1 Turn the ignition switch OFF.