Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
LOCATION
Check the information in the user manual to make
sure that th electrical installation and water outlet is
suitable. If they are not, call a qualified electrician
and a plumber to have the necessary adjustments
made.
It is the customer's responsibility to prepare the
dryer's installation place, as well as the electricity
and waste water installation. Before installation,
check the dryer for damage. If damaged to not
have it installed. Damaged products may endanger
your health.
• Install the dryer on a stable and flat surface.
• Run the dryer in a dust-free environment where
the air ventilation is good.
• The clearance between the dryer and the floor
should not be reduced with objects such as
carpets, wood or tape.
• Do not block the ventilation grills found on the
plinth of the tumble dryer.
• The appliance must not be installed behind a
lockable door, a sliding door or a door with a
hinge on the opposite side of the dryer, in such
a way that blocks the full opening of the dryer
door.
• Once installed, the connections must remain
stable. When installing the dryer, make sure
that the rear surface is not leaning on anything
(e.g. tap, socket).
• The operating temperature of the dryer is 41°F
to 95°F (5°C to 35°C). If operated out of this
temperature range, the performance of the dryer
will be affected negatively and the product will
be damaged.
• Be careful when carrying the product as it is
heavy. Always were safety gloves.
• Always install the product against a wall. The
rear surface of the product should be placed
against the wall.
• Leave at least 1 inch (3 cm) of space between
the sides and rear of the appliance.
• The dryer must be level to operate more quietly
and without vibration. Use a level when
adjusting the leveling legs.
• When the dryer is placed on a stable surface,
to ensure stability, use a level. If not level, adjust
the leveling legs to level the appliance. Repeat
this process every time you relocate the product.
• Do not place the dryer onto the power cable.
• Install the clothes dryer according to the
manufacturer's instructions and local codes.
Under Counter Installation
• Leave at least 1 inch (3 cm) of space between
the side and rear walls of the product and the
underside of the worktop when installing the
dryer under a counter.
• Assembly/disassembly under the counter if
necessary must be done by authorized servicers.
IMPORTANT
To stack the dryer on the washing machine, use
the stacking kit with drawer/shelf included with the
dryer, between the two appliances. The stacking kit
with drawer/shelf must be attached following the
instructions provided.
For stacked installation, ONLY the provided stacking
kit & instructions, MUST be used. If a stacking kit
with instructions, was not included in the dryer
package, contact customer service to acquire.
5
Publicidad
