Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
LEVEL THE APPLIANCE
There are four leveling legs, one the each of the four
corners of the appliance.
Adjust each leveling leg by turning it to the left or
right until the dryer is level and balanced.
The applianced should not be placed on sloping,
crooked or uneven floors.
CONNECTION TO WATER OUTLET (with
optional drain hose)
In appliances with a condenser unit, water
accumulates in the water tank during the drying
process. The accumulated water must be emptied
after each drying cycle. There is an option of using
a water drain hose to directly drain the water which
replaces the requirement to manually drain the
water tank.
Connecting the Water Drain Hose
Pull and take out the end of the hose at the back of
the dryer. Do not use any tools to take out the hose.
Fit one end of water drain hose to the slot where
you removed the hose.
Fix the other end of the water drain hose directly to
the water oulet or sink.
NOTE:
The hose must be connected in a manner that it
cannot be displaced. If the hose is displaced while
draining it can result in flooding in the home.
NOTE:
The water drain hose must be installed at a height
of 31.5 inches(80 cm) maximum.
NOTE:
The water drain hose must not be bent, folded or
stepped over.
6
Publicidad
