Making The Electrical Connections - HAMPTON BAY DSHD1604C Guía De Uso Y Mantenimiento

Installation (continued)
4

Making the electrical connections

□
Ground Wire:
1. Wrap the supply ground wire around the green ground
screw on the crossbar (AA), no less than 2 in. from the end of
the wire. Tighten the ground screw.
2. Connect the fixture ground wire to the supply ground wire
with a wire connector (CC).
□ Supply Wire:
1. Connect the supply white wire to the white fixture supply
wire with a wire connector (CC).
2. Connect the supply black (or red) wire to the black fixture
supply wire with a wire connector (CC).
3. Wrap each connection with approved electrical tape and
carefully insert all of the connected wires into the outlet box.
5
Installing the fixture body to the outlet
box
□
Reattach the backplate on the fixture body (A) to the
crossbar assembly (AA).
□
Secure with the previously removed mounting balls (1).
AA
AA
6
Installing the light bulbs
□
Install the correct bulbs (not included) referring to the fixture
markings and/or labels for maximum wattage.
NOTE
LED equivalent (sold separately).
1
A
6
CC
Green ground screw
: Uses three 60W Candelabra base bulbs or