GE 22 Manual Del Usuario E Instrucciones De Instalación página 5

About the controlson the refrigerator, ww .GEAppliances.co
The controls will look like one of the following."
Initially, set the refrigerator control at 5 and the freezer control at 5
and allow 12-24 hours for the temperature to stabilize.
Several adjustments may be required. Adjust the controls one
increment at a time, and allow 12hours after each adjustmentfor
the refrigerator to reach the temperature you have set
Setting the controls to Ostops cooling in both the refrigerator and
freezer compartments but does not shut off electrical power to
the refrigerator. On some models, only the refrigerator control has
a Osetting.
Touchpad controls
• Setting eithercontrolatOwillautomadcallysetthe othercontrolatR
Thezeros will blink until you set the controls.
• If both controls are set at 0 and either COLDERpad is pressed, the
controls will automatically reset to 5.
Controlsettings will varybased onpersonal preferences, usage and
operating conditionsand may require more than one adjustment
Locking the Controls (onsome models)
This fbamre allows you to lock the controls
so tile settings cannot be changed.
Tolock thecontrols:
O Set tile controls to the desired settings.
Press and hold the lock pad for
3 seconds.
When the controls are locked, the indicator
light will come on and the control settings
will not be displayed.
Tounlockthe controls:
Press and hold the lock pad for 3 seconds.
After unlocking the controls, the settings
will be displayed, tlle lock indicator light
will go out and the settings can be changed.
5