GE 22 Manual Del Usuario E Instrucciones De Instalación página 7

ww_.GEAppliances.com
Slide-Out Spillproof Sheff (on some models)
The slide-out spillproof shelf allows you
to reach items stored behind othm,-s. The
special edges are designed to help prevent
spills from dripping to lower shelves.
To remove:
O Remove all items from shel£
Slide the shelf out until it stops.
Lift the front edge of the shelf until the
central tabs are above the front bar.
Continue pulling the shelf fbrward
until it can be removed.
To replace:
Place tile rear shelf tabs just in front of
the central notches on the shelf frame.
Slide tile shelf in until tile central tabs
are slightly behind tile front bar.
Lower tile shelf into place until it is
horizontal and slide tile shelf in.
Makesurethat theshelfsits flat afterreinstallation
anddoesn'tmovefreelyfromsideto side.
Makesureyoupushtheshelves all theway in
beforeyouclosethedoor
Adjustable Bins on the Door
Adjustable bins can easily be carried from
refrigerator to work area.
TOremove:Lift bin straight up, then
pull out.
TOreplace orrelocate:Engage
the bin in the
molded supports of the door, and push in.
Bin will lock in place.
The snuggerhelps prevent
tipping, spilling
or sliding of small items stored on the door
shelf. Grip the finger hold near the rear of
the snugger and move it to fit your needs.
Non-Adjustable Shelves on the Door
TOremove:Lift the shelf straight up, then
pull out.
TO replace:Engage the shelf in the molded
supports on the door and push down.
It will lock in place.
, Freezer Tilt Out Bin (on some models)
Push the bl_ltton as you tilt out the bin.
TOremove: Hold the sides of the bin and
lift it straight up, then pull out.
TOreplace: Engage the ends of the bin in
the molded supports on the door and
push down. It will lock in place.
NOTE:Donot overload thebin.