Descargar Imprimir esta página

Kenmore ELITE 795.7303 Guía De Uso Y Cuidado página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

REMOVING
AND REPLACING
REFRIGERATOR
DOORS
Excessive Weight Hazard:
Use two or more people to remove and install the
refrigerator
doors. Failure to do so can result in back or
other injury.
Electrical Shock Hazard
Disconnect the electrical
supply to the refrigerator
before installing.
Failure to do so could result in
serious injury or death.
Do not put hands, feet or other objects into the air
vents, base grille, or bottom
of the refrigerator.
You
may be injured or receive an electrical
shock.
To remove the left refrigerator door:
CAUTION:
Before you begin, remove food and bins
from the doors.
1. Open the door. Remove the top hinge cover screw (1).
Lift up the cover (2).
2. Remove the coven
3. Disconnect
all wire harnesses (3).
4.
Remove the grounding
screw (4).
5. Rotate the hinge lever (5) counterclockwise.
Lift the top
hinge (6) free of the hinge lever latch (7).
CAUTION:
When lifting the hinge free of the latch,
be careful that the door does not fall forward.
6. Lift the door from the middle
hinge pin and remove
the door.
7. Place the door, inside facing up, on a non-scratching
surface.
To remove the right refrigerator door:
1. Open the door. Remove the top hinge cover screw (8).
Lift up the cover (9).
2. Remove the cover.
Rotate the hinge lever (10) clockwise.
Lift the top hinge
(11) free of the hinge lever latch (12).
CAUTION: When lifting the hinge free of the latch, be
careful that the door does not fall forward.
.
5.
Lift the door from the middle
hinge pin and remove
the door.
Place the door, inside facing
up, on a non-scratching
surface.
/4%
/ (9)
(8) ............
13

Publicidad

loading