1.In the standby state, press and hold (about 1s) "A " button to enter setting
mode
2.Press the "A" or "B" button to select "Language"
3.Press and hold (about 1s) "A" button to enter sub-menu
4.Press the "A" or "B" button to select the desired value (English, Chinese,
Italiano, Español, Deutsch, Français, and Português are available to select)
5.Press and hold (about 1s) "B" button twice to exit the setting mode
Name ID Setting
1.In the standby state, press and hold (about 1s) "A " button to enter setting
mode
2.Press the "A" or "B" button to select "Name ID"
3.Press and hold (about 1s) "A" button to enter sub-menu, it shows the
Name and ID on the screen.
4.Press "B" button to move the edit position
5.Press "A" button to select the desired value ( The ID could be set from
001-999, the name could be set with A~Z, a~z and space, the name up to
10 characters)
6.Press and hold (about 1s) "B" button twice to exit the setting mode
Note:
The user will be reminded to set the watch pager's name and ID when
the device is turned on for the first time or after a factory reset. Press
and hold (about 1s) "B" button can exit the setting mode
Restore Factory Setting
Clear Pairing
1.In the standby state, press and hold (about 1s) "A " button to enter setting
11