Retekess TD112 Manual Del Usuario página 14

mode
2.Press the "A" or "B" button to select "Default"
3.Press and hold (about 1s) "A" button to enter sub-menu
4.Press the "A" or "B" button to select "Clear"
5.Press and hold (about 1s) "A" button to clear the pairing data, it shows
"Clearing ..." on the screen
6.Press and hold (about 1s) "B" button twice to exit the setting mode
Reset
1.In the standby state, press and hold (about 1s) "A " button to enter setting
mode
2.Press the "A" or "B" button to select "Default"
3.Press and hold (about 1s) "A" button to enter sub-menu
4.Press the "A" or "B" button to select "Reset"
5.Press and hold (about 1s) "A" button to enter reset setting, it shows
"Clearing ..." on the screen
The watch pager will automatically restart after the factory reset is
completed
Specifications
Standby power consumption: 2.5mA
Working frequency: 433Mhz
Adapter: 5V1A
Standby time: 48-72 hours
Capacity: 450 call buttons + 50 keypads + 50 custom callers
Stored call information: 10
Watch Pager PC Software introduce
12