Retekess TD112 Manual Del Usuario página 7

standby state
2.Press any key to delete the currently displayed call information
Set Time
Time Setting
1.In the standby state, press and hold (about 1s) "A " button to enter setting
mode
2.Press the "A" or "B" button to select "Set Time"
3.Press and hold (about 1s) "A" button to enter sub-menu
4.Press the "A" or "B" button to select "Time"
5.Press and hold (about 1s) "A" button to enter the time setting, it shows
Hour and Minute, e.g, 13:12
6.Press "B" button to move the edit position among Hour, Minute, Year,
Month and Date
7.Press "A" button to select the desired value
8.Press and hold (about 1s) "B" button twice to exit the setting mode
Alarm Setting (up to two alarms can be set)
1.In the standby state, press and hold (about 1s) "A " button to enter setting
mode
2.Press the "A" or "B" button to select "Set Time"
3.Press and hold (about 1s) "A" button to enter sub-menu
4.Press the "A" or "B" button to select "Alarm"
5.Press and hold (about 1s) "A" button to enter the Alarm Setting, it shows
the alarm times
6.Press "B" button to move the edit position
7.Press "A" button to select the desired value
05