Publicidad
SECTION
IL GETTING
READY TO SEW
Connecting Machine to Power Supply
(_) Power supply plug
_) Power switch
_) Outlet
(_) Machine socket
_) Machine plug
(_) Light bulb
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
1oTurn off the power switch (_)o
2. Insert the machine plug (_) into the machine socket(_.
3. Insert the power supply plug O into the outlet _)°
4 Turn the power switch(_)to turn on the power and
sewing light(_),,
For Your Safety
* While in operation, always keep your eyes on the sewing
area_ Do not touch any moving parts such as the thread
takeoup lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
- When attaching or removing any pads.
- When cleaning the machine
* Do not place anything on the foot control, when not sewing.
Operating Instructions:
"For appliances with a polarized plug (one blade
wider than the other). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug,, tf it still
does not fit, contact a qualified electrician to install the
power outlet. Do not modify the plug in any way."
"Foot Controller Model YC-482J-1 or TJC-150 for use with
Sewing Machine Model 385.12102XX."
XXX - represents numbers 000 through 999,
J
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs°
Publicidad
