ARDES AR4R07M2 Folleto De Instrucciones página 17

1 - Adjustable thermostat
2 - On/Off pushbutton
3 - Handle
4 - Supports
Technical data indicated on the appliance.
SUPPORTS ASSEMBLY
Insert the supports as shown in below pictures A and B.
Picture A:
front support fixing
Before connecting or disconnecting the device, make sure that On/Off
pushbutton is in off position.
To turn on the device, you must insert the plug into the socket, turn on by
press On/Off pushbutton (2) and enable the ambient thermostat (1) by
rotating it clockwise to the maximum position.
Once the desired room temperature is reached, turn the thermostat (1)
slowly, in a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The indicator light indicates that the appliance is operating and will switch
off when the adjustable thermostat is activated.
Before replacing the appliance in its package, make sure it has cooled
sufficiently.
Technical informations
Instructions for use
Picture B:
rear support fixing
GB
GB
17