rcf ART 7 MK5 Serie Manual Del Propietário página 7

3. REAR PANEL FEATURES AND CONTROLS
1
JACK/FEMALE XLR INPUTS (BAL/UNBAL) The system accepts jack or XLR
input connectors.
2
LIMITER LED The amplifier has a built in limiter circuit to prevent clipping of
the amplifiers or overdriving the transducers. When the soft clipping circuit is active
the LED blinks orange. It is okay if the limit LED blinks occasionally. If the LED blinks
frequently or lights continuously, turn down the signal level.
3
SIGNAL LED The signal indicator lights green if there is signal present on the
main XLR input.
4
POWER LED This LED lights up when the speaker is on.
5
MALE XLR SIGNAL OUTPUT
The output XLR connector provides a loop trough for speakers daisy chaining.
6
VOLUME CONTROL Adjusts the master volume.
7
FLAT/XBOOST SWITCH Sets the flat or boost equalization.
XBOOST increases the depth and richness of the low frequencies. It is
optimal for background music or when the speaker is used full-range and
without a subwoofer.
FLAT equalisation is recommended for all other applications.
8
INPUT SENSITIVITY SWITCH Position the switch in LINE to use a line level
source (0 dB) or MIC to use a microphone source.
9
STANDARD 3-PRONG IEC SOCKET Power connection.
10
FUSE CARRIER Mains fuse housing.
11
POWER MAIN SWITCH The power switch turns the AC power ON and OFF.
WARNING! CAUTION! Loudspeaker connections should be
only made by qualified and experienced personnel having the technical
know-how or enough specific instructions (to ensure that connections are
made correctly) in order to prevent any electrical danger.
To prevent any risk of electric shock, do not connect loudspeakers when the
amplifier is switched on.
Before turning the system on, check all connections and make sure there
are no accidental short circuits.
The entire sound system shall be designed and installed in compliance with
the current local laws and regulations regarding electrical systems.
BALANCED
INPUT/LINK
6
LIMITER
SIGNAL
1
POWER
FLAT
XBOOST
LINE
5
MIC
1
INPUT SENSITIVITY
9
11
10
2
3
4
7
8
7