Publicidad
Idiomas disponibles
Idiomas disponibles
EN
USING INSTRUCTIONS
1. Remove all internal and external packaging and check for ice baskets and
spoons. If any attachments are missing, please contact the customer service
department.
2. Remove the ice basket and scrub in warm water, then wash the tank with
warm water and a soft cloth.
3. Place the ice maker out of direct sunlight and away from heat and
radiation. Place the ice maker horizontally and ensure that there is at least
15cm of space between the sides and the back.
4. The ice maker is placed in a suitable socket to power on.
5. Open the top cover and put in the ice basket (as shown below).
6. Press the
button to select the ice size. If the room temperature is
below 15℃, to prevent ice linking, it is recommended that you choose small
ice.
7. Open the top cover, take out the ice basket, add water to the water tank,
keep the water level below the highest mark, put the ice basket back and
close the top cover.
8. Press the
power key on the control panel to start making ice. The
initial water should be more than 1L.
9. The duration of each ice-making cycle depends on the size of the selected
ice cubes and room temperature. The size of the ice cubes is related to
water temperature and ambient temperature.
10. After the ice making machine is started, the water level in the water
tank should be checked regularly. If the pump can not get out of the water,
the ice maker will stop automatically, and the "water shortage" indicator
light is on to indicate the water shortage. At this time, the water tank should
be filled up, and then press the
button to restart the ice making.
11. If the ice basket is full, the making of ice stops automatically.
12. It is recommended to change water every 24 hours to keep the water
clean. If the ice maker is not used for a long time, drain the remaining water
from the tank.
Advice: Use water that is drinkable.
05
Publicidad
