Kamikaze KVS7000P Manual página 52

Warning!
The chain lubrication is adjustable (see chapter 7.2).
The set values are the optimal ones for the correct operation of the chainsaw.
To check the correct operation of the oil pump, turn on the chainsaw and check if there are traces of oil
on the ground below.
If there are not traces of oil, check to have refilled the tank.
If there are not traces of oil with the tank full, contact the service center.
Warning!
Do not use the chainsaw if the oil pump is not working properly.
15.6. Lubrificazione riduttore
To guarantee the correct operation and durability of the chainsaw, it is necessary:
Using a syringe, add 4 ml of SAE 30 synthetic oil to the gearbox every 10 actual working hours of the engine
(see working time indicator on the screen).
Using a syringe, add 5 to 8 grams of consistency 1 lithium grease to the gearbox every 20 actual working
hours of the motor (see working time indicator on the screen).
Procedure:
• Clean the cap, tank, and surroundings with a damp cloth.
• Unscrew the screw indicated by the arrow and add grease or oil as appropriate.
• Fully screw in the screw.
USE HIGH QUALITY LITHIUM GREASE AND OIL TO ENSURE TOOL DURABILITY AND RELIABILITY.