Interrupting Operation; Canceling Mistakes; Operating Preprogrammed Pads; Manual Time Entry - Amana LD510 Manual Del Propietário

Operation
To avoid damaging oven, only heat in microwave oven
when turntable is in place.
To avoid fire, do not dry newspapers or clothes in
GB
microwave oven.

Interrupting Operation

• Open oven door to interrupt operation. Oven fan
continues to operate. Close door and press
START pad to resume oven operation.
• Press STOP/RESET pad to interrupt operation.
Display continues to show countdown time. Press
START pad to resume oven operation and countdown
timing.

Canceling Mistakes

• If oven is operating, press STOP/RESET pad once to
stop oven, then again to clear display.
• If oven door is open and time shows in display, close
oven door and press STOP/RESET pad to clear
display.

Operating Preprogrammed Pads

All models has 10 preprogrammed number pads. Model
LD510S, ULD510S has 20 proprammable pads
(01-20). Instructions are written for factory proprammed
ovens. Ovens that are reprogrammed can respond below.
1. Open oven door, place food in oven, and close oven
door.
• If pad is not pressed in 30 seconds, open and close
oven door again.
2. Press desired number pad.
• For some models press 2 digits (01-20).
• Oven operates and time counts down.
3. Oven stops heating and oven signal sounds when
heating timing elapses.
X2 (Double Quanity Feature)
Model LD510S, ULD510S only. The X2 pad can add from
10%-100% of additional heating time. The factory setting is 80%
1. Open oven door, place food in oven, and close oven
door.
• If pad is not pressed in 30 seconds, open and close
oven door again.
2. Press X2 pad.
3. Press desired number pad.
• For some models press 2 digits (01-20).
• Oven operates and time counts down.
4. Oven stops heating and oven signal sounds when
heating timing elapses.
!
CAUTION
!
CAUTION
Preprogrammed Times and Cook Level
All preprogrammed pads arrive set at full power.
Pads Heating
Times
1 (01) 10 sec.
2 (02) 20 sec.
3 (03) 30 sec.
4 (04) 45 sec.
5 (05) 1 min.
6 (06) 1:30 min.
7 (07) 2 min.
8 (08) 3 min.
9 (09) 4 min.
0 (10) 5 min.

Manual Time Entry

Manual Time Entry feature allows the operator to enter
time and power levels, and heat without changing the
preprogrammed pads.
1. Open oven door, place food in oven, and close door.
• Display shows "READY".
• If pad is not pressed in 30 seconds, open and close
oven door again.
2. Press TIME ENTRY pad.
• Display shows "0000".
3. Press number pads to enter desired cooking time.
• For example, to heat for 2 minutes 30 seconds,
press 2 , 3, and 0 pads.
4. Press desired power level pad to change power level.
• Display shows current power level if other than 100
percent power.
• The factory setting is 100%.
5. Press START pad.
• Oven operates and time counts down.
6. Oven stops heating and oven signal sounds when
heating timing elapses.
10
Pads Heating
Times
(11) 20 sec.
(12) 40 sec.
(13) 1 min.
(14) 1:30 min.
(15) 2 min.
(16) 3 min.
(17) 4 min.
(18) 6 min.
(19) 8 min.
(20) 10 min.