Hotpoint Ariston FK 897 E 0 X/HA Manual De Instrucciones página 22

Before connecting the appliance to the power supply, make sure that
GB
• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance, which is
indicated on the data plate.
• The voltage is in the range between the values indicated on the data plate.
• The socket is compatible with the plug of the appliance. If the socket is
incompatible with the plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power supply cable and the
electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by authorised technicians
only (see Assistance).
! The manufacturer declines any liability should these safety measures
not be observed.
22
APPLIANCE SPECIFICATIONS
width 43.5 cm
Dimensions*
height 32,4 cm
depth 41.5 cm
Volume*
59 l
width 45.5 cm
Dimensions**
height 32,4 cm
depth 41.5 cm
Volume** 62 l
voltage: 220-240V~ 50/60Hz or
Electrical
50Hz (see data plate) maximum power
connections
absorbed 2800 W
EU Directive no 65/2014
supplementing Directive 2010/30/EU.
EU Regulation no 66/2014
Energy
implementing Directive 2009/125/EC.
Label e
Standard EN 60350-1
Ecodesign
Standard EN 50564
Declared energy consumption
for Forced convection Class –
heating mode: ECO
This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EC dated 12/12/06
(Low Voltage) and subsequent
amendments
- 2004/108/EC dated 03/05/89
(Electromagnetic Compatibility)
and subsequent amendments
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2012/19/EU and subsequent
amendments.
- 1275/2008 standby/off mode.
* Only for models with drawn rails.
** Only for models with wire rails.