Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Delayed start
You can use this auxiliary function to delay the start time of the wash cycle from 1 to 23 hours.
To use the delay start function:
1.
Press the delay key once.
2. 01" will be displayed. A clock icon will light up on the display.
3. Press the Delayed Start key until the time you want the machine to start the wash cycle arrives.
4. If you have skipped the Delayed Time you want to set, you can keep pressing the Delayed Start key
until you reach that time again.
5. To use the Delayed Time function, you must press the Start/Pause key to start the machine.
6. If you want to cancel the delayed start:
7. If you have pressed the Start/Pause key to start the machine, you only need to press the Delay key
once. The clock icon will go off on the display.
8. If you have not pressed the Start/Pause key, press the Delay Start key continuously until the clock icon
goes off.
Start/Pause button
To start the selected programme, press the Programme Start/Pause button.
If you activate the standby mode of the machine, the Start/Pause indicator will flash.
Child Lock
If any button is pressed while the child lock is active or the programme selected on the programme se-
lector is changed, the "CL" symbol will flash on the electronic display for 2 seconds.
If the child lock function is active and a programme is in progress, when the programme selector is set to
the CANCEL position and another programme is selected, the selected programme continues from the
point where it was.
To deactivate the child lock function, press and hold buttons 2 and 3 at the same time for at least 3 se-
conds until the "CL" symbol disappears from the electronic display.
40
English
infiniton.es
Publicidad
