Publicidad
Idiomas disponibles
Idiomas disponibles
AC TRMS Leakage Clamp Meter
5.Function
5-1.LPF
• Press and hold the LPF Button to turn LPF TEST, the LCD will display "
• To press and hold the LPF Button to turn the system on, the auto power off function will be
cancelle.
5-2.HOLD/Flashlight
• To freeze the LCD reading, press the HOLD/Flashlight Button.
• While data hold is active, the HOLD icon appears on the LCD.
• Press the HOLD/Flashlight Button again to return to normal operation.
• The LCD is equipped with backlighting for easier viewing, especially in dimly lit areas.
• Press the HOLD/Flashlight Button to turn the Flashlight on, press again to turn the Flashlight
off.
5-3.PEAK
In AC current test mode, press the PEAK Button the peak HOLD values are measur
5-4.Backlight
• Press the turntable, key and knob Backlight Button to turn the Backlight on.
• Press again to turn the Backlight off.
5-5.Automatic Power OFF
• In order to conserve battery life, the meter will automatically turn off after approximately 15
minutes.
• To turn the meter on again, turn the function switch to the OFF Position and then to the desired
function position.
• To press and hold the LPF Button to turn the system on, the auto power off function will be
cancelled.
8
".
ed.
Publicidad
