Xylem FLOJET BevJet 5000 Serie Manual página 3

CAUTION: To avoid exposure to freezing conditions, prior to storing, cleaning and servicing of pumps, purge all liquid
from the pump. Allowing water to freeze in the system may result in damage to the pump and plumbing system.
Only used with specified products.
DO NOT PUMP LIQUIDS WITH A FLASH POINT BELOW 100ºF (37.8ºC) OR USE WHERE
FLAMMABLE VAPORS ARE PRESENT.
Note: Open valve on initial startup to purge air from discharge line.
Figure 1
ON/OFF
switch
New vacuum
switch assembly
3/8 barb fitting
New pigtail
connector / wireconnect
to vacuum SW terminals
Grounded
outlet
Power cord
Wall power
transformer
Figure 2 — Typical beverage installations
2.95
[75]
7.63
[193.8]
BevJet
5000 Series
Power supply
DC plug/connector
Post
mix
Soda application Cask application
Dimensions
Dimensions Pouces [Millimètres] / Abmessungen Zoll [Millimeter] /
Dimensioni Pollici [millimetri] / Afmetingen Inch [Millimeters]
Mått tum [millimeter] / Dimensiones pulgadas [milímetros]
2.95
[75]
3/8 barb
fitting
7.63
[193.8]
Juice
Juice application
3
Inches [Millimeters]
109°F (43°C)
Safe fluid
operating
temperature
34°F (1.1°C)