Descargar Imprimir esta página

GE PGP9830 Manual De Instrucciones página 26

Publicidad

Idiomas disponibles

Idiomas disponibles

Z
0
i
I--
U
::)
cx:
l--
Z
u
Z
0
g
_J
_J
Z
i
Installation
Instructions
INSTALLING THE COOKTOP
r_ INSTALLINGTHE BLOWER PLENUH
TO THE COOKTOP
Slide the plenum, with the blower opening on the left, into
the opening in the bottom of the cooktop. Pushup on the
plenum until the stops on the plenum contact the bottom of
the cooktop, and snap the plenum into place. (You may have
to move the plenum back and forth to work it into place.)
"
_tnstall2screws
Install 4 screws
Secure the plenum to the bottom of the cooktop, on each
side, using the four (4)screws provided. Further secure the
plenum to the cooktop, from the top side, using the two
screws (2) provided.
r_ INSTALLINGTHE BLOWER
TO THE PLENUH
Orient the blower discharge opening to match the ductwork
in Steps 5 and 6. Slide the four threaded studs on the side
of the blower housing into the four holes on the side of the
plenum.
NOTE:SeeStep 13 for installing the transition duct to the
blower. It may be easier to install the transition duct to the
blower before installing the blower to the plenum.
From the vent opening in the top of the cooktop, fasten the
blower assembly securely to the plenum with four (4)nuts.
4 Nuts
(7/1¢
socket
required)
6
49
80516
4

Publicidad

loading

Este manual también es adecuado para:

Pgp989