Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1.
Handle
2.
Hose
3.
Tube
Accessory for floors
4.
5.
Lid opening tab
6.
Hose connector
7.
Power button
Cord-winding button
8.
9.
Power knob
NOTE
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
-
Conga Powerbag 4000 XL Canister Vacuum Cleaner
-
Metal telescopic tube
-
Hose
-
Vacuum base
-
Accessory for furniture
-
Accessory for corners
-
High-efficiency filter
-
Instruction manual
34
CONGA POWERBAG 4000 XL
3. OPERATION
Please note
-
Once the accessories are mounted, unwind the cable enough to plug it into the socket.
-
A yellow mark on the power cable marks the ideal length. Do not unwind the power beyond
the red mark.
-
Connect the power cord into a socket.
-
Press the power button to turn the vacuum cleaner on.
-
To rewind the power cord, press the cable-rewinding button with one hand and hold the
power cord with the other to avoid damage or injury resulting from a whipping effect. The
yellow mark on the power cord indicates that it is close to the cord limit. Do not pull the
cord beyond the red mark.
Important
The appliance motor is equipped with a safety thermostat. If for any reason the vacuum
cleaner overheats, the thermostat will automatically switch off the appliance. If this happens,
switch off the vacuum cleaner and unplug it from the socket. Remove and empty the dust tank
and clean the filter. Allow the appliance to cool down for about an hour. To restart it, plug it
back into the socket and switch it on.
Installing the hose
-
Insert the hose into the connector. To do this, align both parts and insert the hose by
pressing until it snaps into the correct position.
Removing the hose
-
Remove the plug from the outlet. To remove the hose, press firmly on the tabs on both
sides of the connector.
Power knob
Turn the power knob on the main body to the right to increase suction power, or to the left to
decrease suction power.
4. CLEANING AND MAINTENANCE
Cleaning the dust tank. Fig. 2
1.
Open the dust tank cover.
2.
Remove the paper bag (paper bags cannot be reused).
3.
Close the lid. Paper dirt bags cannot be reused.
ENGLISH
35
CONGA POWERBAG 4000 XL
Publicidad
