GENERAL OPERATION
Hot air frying
1
1.
Plug the power plug into the mains socket.
2.
Carefully pull the baskets out of the hot air fryer (see image 1)
3.
Put the ingredients in the basket (see image 2).
4.
Slide the baskets back into the air fryer (see image 3). Use the guides in the
housing as a guide when pushing it in.
CAUTION
Risk of burns! Do not touch the baskets during and for some time
after use as they become very hot. Only hold the baskets by the
handle.
5.
Determine the required preparation time for the ingredient using the cooking
table (see chapter "Settings and cooking table")
6.
Some ingredients have to be shaken halfway through the preparation time
(see chapter "Settings and cooking table"). To shake the ingredients, pull the
basket out of the device by the handle and shake it. Then slide the basket back
into the fryer.
Tip: If you set the timer halfway through the preparation time, you will hear the
timer chime when you need to shake the ingredients. However, that means you
have to set the timer back to the remaining prep time after shaking.
7.
When you hear the timer sound, the set cooking time has elapsed. Remove
the basket from the device and place it on a trivet.
8.
Check if the ingredients are done. If the ingredients are not done yet, slide the
basket back into the device and set the timer for a few more minutes.
2
3
EN
23