Publicidad
Idiomas disponibles
Idiomas disponibles
Keys
Key(s)
(1) Quick
Connect
Slope Sheet
1
Your new tractor has been assembled at the factory with the exception of those parts left
unassembled for shipping purposes.
TOOLS REQUIRED
FOR ASSEMBLY
A socket wrench set wil! make assembly
easier. Standard wrench sizes are listed.
(1) 1/2" wrench
Tire pressure gauge
(2) 7/16" wrenches
Utility knife
Pliers
When right or left hand is mentioned in this
manual, itmeanswhenyouareintheoperating
position (seated behind the steering wheel).
TO REMOVE TRACTOR
FROM
CARTO N
UNPACK CARTON
•
Remove all accessible loose parts and
parts cartons from carton,
•
Cut along dotted lines on all four panels
of carton. Remove end panels and lay
side panels flat.
•
Check for any additional loose parts or
cartons and remove,
BEFORE REMOVING
TRACTOR
FROM SKID
TO CHECK BATTERY
t. Lift seat to raised position.
NOTE: If this battery is put into service after
month and year indicated on label (label is
located between terminals) charge battery
for minimum ofone hour at 6-10 amps. (See
"BATTERY" in Maintenance section of this
manual for charging instructions).
•
For battery and battery cable installation
see "REPLACING BATTERY" in the
"Service and Adjustments" section in
this manual.
Label
ADJUST SEAT
I,
Sit in seat.
2. Lift up adjustment lever (A) and slide seat
until a comfortable position is reached
which allows you to press clutch/brake
pedal all the way down.
3. Release lever to lock seat in position.
NOTE: You may now roll your tractor off the
skid. Continue using the instructions that
fellow to remove the tractor from the skid.
WARNING: Before starting, read, un-
derstand and follow all instructions in the
Operation section of this manual. Be sure
tractor is in a well-ventilated area. Be sure
the area in front of tractor is clear of other
people and objects.
Publicidad
