Costway EP24210DE Manual Del Usuario página 8

"ICE FULL" 1. Ice basket is full and
indicator lights up the infrared light is
blocked by the ice.
2. Infrared light-emitting
diode & light-receiving
diode do not work.
The ice collects Making ice takes too
together. much time.
The water in the water
reservoir is of too low
temperature.
The ice-making The ambient
cycle seems temperature or water
normal butno ice temperature is too high.
is produced.
14
1. Remove the ice from
ice basket.
2a. Wipe up the foreign
objects on the infrared
light-emitting diode &
light-receiving diode
and restart the ice
maker.
2b. Ask qualified
technician for help.
Stop making ice and
restart the ice-making
cycle after the ice melts.
Fill the water reservoir
with water ranging
between 8℃ and 25℃.
Start the ice-making
cycle in an environment
with an ambient
temperature less than
32 ℃ and fill the water
reservoir with some
cold water.
Refrigerating system
leaks
Refrigerating system
blocks
Poor ice-making 1. Poor heat dissipation.
result 2. The water
temperature is too
3. The ambient
temperature is too high.
TECHNICAL PARAMETERS
Model:
Applicable climate:
Class:
Power source:
Rated power:
Refrigerant/Refrigerant amount:
Foaming agent:
Net weight:
Housing:
Unit size (DXWXH):
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the
non-working electrical equipment to an appropriate waste
disposal center.
Ask qualified technician
for help.
Ask qualified technician
for help.
1. Leave a 20 CM
clearance on all sides of
the ice maker for proper
ventilation.
2. Fill the water reservoir
with water ranging
between 8℃ and 28℃
3. Operate the ice
maker in an
environment with an
ambient temperature
between 10℃ and 32℃.
EP24210DE
ST/SN/N/T
I
220-240V/50Hz
0.8A
R600a/29g
C5H10
8.4 Kg
ABS
348x248x290mm
15