Publicidad
Idiomas disponibles
Idiomas disponibles
Make Electrical Connections
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1.
Disconnect power.
2.
Locate terminal box inside of the hood insert.
B
C
3.
Use UL listed wire connectors and connect black
wires (B) together.
4.
Use UL listed wire connectors and connect white
wires (A) together.
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground
wire in terminal box.
Failure to do so can result in death or electrical
shock.
A.White wires
B. Black wires
C. UL listed wire connectors
D. Green, bare or yellow/green
wires
E.Home power supply
E UL listed or CSA approved ½" (1.3 cm) strain relief
G. Ground Wire tab
Publicidad
