PowerA CPAC0235-01 Manual De Usuario página 3

C.
The IR sensor must be visible from wherever the controller will be used to control the LED strip. The
IR remote must be pointed at the IR sensor to control the LED strip.
INLINE CONTROL FEATURES
1. MODE SELECTION
Each press of this button will change the LED mode on the strip:
A. SOLID – All lights will be steadily lit with a single color. No speed settings
for this mode.
B. BREATHING – LED lights will slowly flash; pressing the View button will change speed.
C. CYCLE – LED lights will cycle through all 24 available LED colors; pressing the
VIEW button will change speed.
D. MUSIC SOLID – LED lights will turn on with each noise or sound played; LED colors
will change with each sound as well.
E. MUSIC CYCLE – LED lights will flash in different colors each time a noise or sound is played.
2. COLOR SELECTION
Each press of this button will cycle through 24 different LED colors.
3. POWER ON/OFF
This will turn on or off the LED strip lights.
IR REMOTE FEATURES
ON: This button will turn ON the LED strip lights.
OFF: This button will turn OFF the LED strip lights.
R: Press to quick change ALL LED strip colors to the base RED color.
G: Press to quick change ALL LED strip colors to the base GREEN color.
B: Press to quick change ALL LED strip colors to the base BLUE color.
W: Press to quick change ALL LED strip colors to the base WHITE color.
COLOR CYCLE: Each press will change the LED strip colors to one of the 24 possible colors.
MODE SELECTION: Each press of this button will change the LED mode on the strip:
a. Solid b. Breathing c. Cycle
+ : Pressing the plus button will increase the speed at which the mode behaves.
- : Pressing the minus button will decrease the speed at which the mode behaves.
d. Music Solid e. Music Cycle