Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Cordless-Chain saw
Battery voltage
Usable cutting length
Usable cutting width
Device length
Weight with battery
Vibration details
Vibration total values (triaxial vector sum) determined according to ISO 22867,
Uncertainty K = 1,5 m/s
2
Vibration emission value a
h
Noise information
Measured according to
EN 62841-1;
1)
Sound pressure level L
Unsicherheit K = 3 dB (A)
1)
pA
Guaranteed sound power level
Recommended battery types
Recommended charger
Technical changes reserved.
WARNING: The declared vibration total value(s) and the declared noise emission value(s) were measured according
to a standardized test method according to EN 60745 and can be used to compare one power tool with another. The
declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period. The vibration emission level will vary because of the ways in
which a power tool can be used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
SAFETY WARNINGS
Read and understand the operating instructions
before using the appliance. Familiarise with the control
elements and how to use the appliance properly. Abide
by all the safety measures stated in the service manual.
Act responsibly toward third parties.
The operator is responsible for accidents or risks to third
parties.
In case of any doubts about connection and operation
refer please to our customer center.
2000/14/ EG+2005/88/EC
2)
General Power Tool Safety Warnings
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to your
mains-operated (corded) power tool and battery-
operated (cordless) power tool.
ICPH 2040
20 V DC / 2,0 Ah
400 mm
18 mm
2,20 - 2.75 m
3,45 kg
<2,5 m/s
79,4 dB (A)
93 dB (A)
Typ LI 22 / LBC202Z-2
CGB20/JLH262102000G
WARNING Read all safety warnings,
instructions, illustrations and specifica tions
GB
ENGLISH
2
17
Publicidad
