Ultra-Light
Removing
1.
Pull the side rest by the arm cushion out of the holder.
2. To adjust how easy or difficult it is to pull the side rest out of
the holder, change the degree to which the screws C are
tightened.
Fitting
1.
Push the side rest into the holder.
Adjusting the height
1.
Loosen the screw A of the retaining plate B.
2. Move the armrest upwards or downwards until you reach
the desired height.
3. Tighten the screw A.
4. Perform the setting on both sides.
3.10 Simple armrest, height-adjustable,
swivelling, non-locking
16
WARNING!
Risk of injury
The armrests are not locked and can be easily
pulled out upwards.
– Do not lift or transfer the wheelchair using the
armrests.
– Do not use the armrests for transportation when
carrying the wheelchair up- or downstairs.
Removing
1.
Raise the armrest and pull it upwards out of the holder.
Fitting
1.
Push the armrest into the holder.
Adjusting the height
1.
Pull the armrest out of the holder.
2. Loosen the screw on the tube of the armrest and screw it
back in at the desired height.
3. Push the armrest back into the holder.
4. Perform the setting on both sides.
Swivelling
1.
Raise the armrest a little and swivel it outwards.
1583566-A