MANUAL MASSAGE
First read and familiarize yourself with the safety precautions.
1. Push the operation switch buttons and set the slide cover to
the manual "up" position.
2. Push the massage selector button.
O Massage
operation
can
be
changed
by pushing
the
massage selector button progressively as follows.
. Upward massage
Downward massage
. Rolling massage
Regional rolling massage
. Kneading and rolling massage
. Regional kneading and rolling massage
Q) Select the upward massage or downward massage mode to begin massaging.
(2) To adjust to the desired position, use the up or down buttons.
NOTE: Do not massage any one point for more than 5 minutes. Do not stretch the back muscles for more
than approx. 15 minutes at one time. A continuous massage in the same area may result in soreness.
Rolling massage
@) Select the rolling massage mode.
O The massage heads move to the narrow position and start the rolling massage.
(2) Use narrow or wide adjustment button to adjust the width of the massage heads.
@) To raise the massage heads, push the up button. To lower them, push the down button.
O When you wish to stretch only a certain part of your back, use the up button to raise the massage
heads or down button to lower them.
OnAWN
—
12