Melchioni Family BBQ2 Manual De Instrucciones página 10

ASSEMBLE THE GRILL AS THE CHART
Assemble the wind shield according to the schematic diagram supplied (in models where provided), and then
fix the zinc on the body. Ensure that the grill is placed in a safe and stable position. The power cord should be
placed suitably in order that no one is likely to trip over it.
1. Body
6. Straight metal pipe
BEFORE USING FOR THE FIRST TIME
1. Remove any packaging materials from the appliance.
2. Clean the grill rack and its accessories.
3. Fasten 4pcs of plastic foot on the back side of body. see pic. No.2 above.
4. Fill the body with water up to the '1 L.' marking.
5. The barbecue assembly:
a. Insert the straight metal pipe through 2 holes of zinc plate and body on two sides.
b. Use M4 nut to fasten the zinc plate in the front holes of body (next to the electric junction box) by the
longest screw fixed.see pic.No.5 up
6. Place the two rubber sockets onto the left &right sides of the straight metal pipe to avoid the overheat.see
pic. No.A up.
7. Insert heating element above zinc plate and guarantee its bottom hole connected with metal hook.see pic.
No.B up.
2. Metal Hook 3. Plastic foot
7. Rubber sockets 8 Healing element
4. Zinc plate
9. Grill rack
9
5. M4 nut