Sony SCD-XB780 Manual De Instrucciones página 24

Listening to the Multi-channel Super Audio CD
5
Press l AMS L.
The test tone issues from the speakers in sequence
with the speaker type appearing in the display.
6
Turn l AMS L until the desired item appears
in the display.
Select the item from "CNTR BALANCE," "SURR
BALANCE," or "SW BALANCE."
Note
When you set the Sub woofer to "––" in the Multi-channel
playback mode (page 22), "SW BALANCE" cannot be
selected. Similarly, "CNTR BALANCE" or "SURR
BALANCE" cannot be selected when you set the
corresponding speaker to "––."
7
Press l AMS L.
The balance adjustment display appears.
In stop mode, the test tone is output from the selected
speaker.
Example: When you select "SURR BALANCE"
during stop mode, the test tone is output
from the front speakers and surround
speakers.
DISC
F R T : _ _ _ _ _ : S U R R
8
Turn l AMS L to adjust the output level.
DISC
F R T : _ _ _ _ _ : S U R R
9
Press l AMS L.
The player status returns to Step 6.
Repeat Step 6 through 9 for more adjustments.
10
Press MENU after you finish adjusting.
The display returns to the normal display.
Adjusting the output level from the remote Z
You can adjust the output level of each speaker from the
listening position by using the supplied remote.
1
Press LEVEL ADJ during playback or stop mode.
During playback, go to Step 4.
GB
24
2
Press ./> repeatedly until "TONE ON"
appears in the display.
3
Press ENTER.
The test tone issues from the speakers in sequence
with the speaker type appearing in the display.
4
Press ./> repeatedly until the desired item
appears in the display.
Select the item from "CNTR BALANCE," "SURR
BALANCE," or "SW BALANCE."
Note
When you set the Sub woofer to "––" in the Multi-channel
playback mode (page 22), "SW BALANCE" cannot be
selected. Similarly, "CNTR BALANCE" or "SURR
BALANCE" cannot be selected when you set the
corresponding speaker to "––."
5
Press ENTER.
The balance adjustment display appears.
In stop mode, the test tone is output from the selected
speaker.
Example: When you select "SURR BALANCE"
MULTI CH
S A C D
1 2 3 4 5
6 7 8 9 10
F R T : _ _ _ _ _ : S U R R
MULTI CH
S A C D
1 2 3 4 5
6
Press ./> repeatedly to adjust the output
6 7 8 9 10
level.
F R T : _ _ _ _ _ : S U R R
7
Press ENTER.
The player status returns to Step 4.
Repeat Step 4 through 7 for more adjustments.
8
Press LEVEL ADJ after you finish adjusting.
The display returns to the normal display.
during stop mode, the test tone is output
from the front speakers and surround
speakers.
DISC
DISC
MULTI CH
S A C D
1 2 3 4 5
6 7 8 9 10
MULTI CH
S A C D
1 2 3 4 5
6 7 8 9 10