Beko HNT61310X Manual Del Usuario página 9

Using the appliance
3
3.1 Controlling the appliance
KEY FUNCTION
A : Light On / Off
Pull the sliding plate to the front.
Press the button downwards to
turn on the lamp or upwards to
turn off the lamp.
B : 1 and 2 Speed
Pull the sliding plate to the front.
Press the button upwards to op-
Button
erate the hood at speed level 1,
and downwards to operate the
hood at speed level 2.
C : 3rd Speed
Pull the sliding plate to the front.
Press the button downwards to
Button
operate the hood at speed level
3.
3.2 Energy efficient usage
• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) for intense odour and vapour.
• The lamps on the hood are placed for illuminat-
ing the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
3.3 Operating the hood
• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using low
speeds under normal conditions and high speeds
in cases of strong odours and intense vapour.
• You can start your appliance by pressing on the
desired speed setting button. (B, C)
Cooker Hood / User Manual
• You may illuminate the cooking area by pressing
the lamp (A).
3.4 Replacement of lamp
CAUTION: Disconnect the electrical
A
supply of the hood. Leave the lamps
to cool down first because they co-
uld burn your hands when they are
hot.
Remove the aluminium cartridge filter. Remove the
defective bulb and replace with a new one with the
same rating.
Bulb
Bulb Power 3 W
Holder / Socket E 14
Bulb Voltage 220 - 240 V
Size 35 x 100 mm
ILCOS Code D R B B / F - 3 - 2 2 0 -
240-E14-35/100
Luminous flux 220 lm
Correlated colo- 2700 K
ur temperature
This product contains a light source of energy ef-
ficiency class "E".
MAX 3 W
9 / EN