Adidas G022A Guia Del Usuario página 10

Care and Cleaning for Team FX insole
Your Team FX insole consists of a high-performance EVA compound. Ne-
vertheless, treat it with care and make sure you air dry it once it has got
wet. Always handle the shoes with care when the device is integrated.
(i.e. do not hit the shoe against walls or sharp edges.)
Remove the Jacquard Tag before washing and cleaning the insole or the
shoes. Do not wash or dry the Jacquard Tag. To clean the Jacquard Tag,
wipe it with a soft dry or damp cloth. Do not use soaps, solvents or
abrasives on the Jacquard Tag.
Insole care instructions
Do's
• Wash in cold water and air dry.
Dont's:
• Do not expose the insole to direct sunlight or a near heat source
like an oven or a radiator after washing.
• Do not use solvent-based care products such as leather creams as
they will damage the surface.
The a didas Team FX boot insole is developed to fit in all kinds of foot-
ball boots (Soft Ground, Firm Ground, Hard Ground, Artificial Turf, Multi
Ground, Turf and Indoor) and does not refer to adidas boots only. Never-
theless, make sure that the insole fits in the shoe properly as otherwise
your product could be damaged.
10
Regulatory Information | Jacquard Tag
| G022A
Due to the small size of the Jacquard Tag, Compliance marks
specific to the Jacquard Tag can be found within this guide.
Additional regulatory information, compliance marks and environmental
information can be found at www.adidasTeamFX.com
Additional regulatory information, Certification, and compliance marks
can be found in the Team FX App device settings menu: Settings > About
> Regulatory Information.
Manufacturer address for Jacquard Tag ( Jacquard Tag and USB cable):
Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043.
Designed by Google. Made in China.
Manufacturer address for insoles and Symmetry tags: adidas AG, World
of Sports, Adi-Dassler-Straße 1, 91074 Herzogenaurach, Germany.
Designed by adidas. Made in Germany.
US Compliance Notice
EMC Compliance
Important: This product has demonstrated EMC compliance under
conditions that include the use of compliant peripheral devices and
shielded cables between system components. It is important that you
use compliant peripheral devices and shielded cables between system