Hitachi RC-AGU1EA0G Manual página 8

Powerful Operation
• By pressing
(Powerful) button during Auto, Heat, Dry, Cool, or Fan operation, the air conditioner
Powerful
performs at maximum power.
• During Powerful operation, cooler or warmer air will be blown out from indoor unit for Cooling or
Heating operation respectively.
CANCEL
NOTE
• When Eco Operation, LeaveHome Operation,Silent Mode, GoodSleep Timer or My mode is selected ,
Powerful Operation will be cancelled.
• During Powerful operation, capacity of the air conditioner will not increase
– if the air conditioner is already running at maximum capacity.
– just before defrost operation (when the air conditioner is running in Heating operation).
LeaveHome Operation
Prevent the room temperature from falling too much when no one is at home .The initial setting
temperature is 10.0℃ and the temperature range can be set between 10.0℃ and 16.0℃.
NOTE
• During LeaveHome operation, fan speed and horizontal air defl ector position cannot be changed.
Press the (Powerful) button during operation.
Powerful
• " " is displayed on the LCD.
START
Powerful operation ends in 20 minutes. Then the system
automatically operates with the previous settings used before
Powerful operation.
• Press the
Press the (Powerful) button again.
Powerful
• " " disappears from the LCD.
Press
1
operation.
Room temperature is set at 10.0
starts.
START
2 Set the desired room temperature with the Temperature
buttons.Temperature range can be set between 10.0
and 16.0
• "
displayed on the LCD.
Press the
CANCEL
Press the
Change to other Operation Mode.
- 8 -
(On/Off) button. or
(LeaveHome) button during stop or
℃
℃.
", " ", " ", "Set Temperature" is
(On/Off) button. or
(LeaveHome) button again.
and heating operation
℃