Hitachi RC-AGU1EA0G Manual página 19

Operation Mode Lock
The remote controller can be set to fix the Heat Mode (including Fan Mode), Cool Mode and Dry Mode
(including Fan Mode) operations.
NOTE
Operation Mode Lock function will not activate if Timer reservations or My Mode is activate.
Timer reservations shall be deactivated first. Then, Operation Mode Lock function can be activated.
Operation Mode Lock can be kept even i f
Operation Mode Lock will not be set if FrostWash(Manual Mode) is in progress.
LeaveHome button is disable during lock Cool mode and Dry Mode operation.
Method to lock Heat Mode (including Fan Mode) operation.
Press (Mode) and
when the remote controller is OFF.
" ", " " and " " will be displayed for about 10 seconds. Later, "
will remain.
This indicates that Heat Mode operation is locked.
When pressing (Mode) button, "
Method to unlock Heat Mode (including Fan Mode) operation.
Press (Mode) and
when the remote controller is OFF.
All operation mode symbols will appear on the display for about 10 seconds "
will disappear. After that, "
This indicates that Heat Mode operation is unlocked.
Method to lock Cool Mode and Dry Mode (including Fan Mode) operations.
Press (Mode) and
remote controller is OFF.
" ", " ", " " and " "will be displayed for about 10 seconds. Later, "
" " will remain.
This indicates that Cool Mode and Dry Mode operation is locked.
When pressing (Mode) button, "
Method to unlock Cool Mode and Dry Mode (including Fan Mode) operations.
Press (Mode) and
the remote controller is OFF.
All operation mode symbols will appear on the display for about 10 seconds "
will disappear. After that "
This indicates that Cool Mode and Dry Mode operation is unlocked.
(Reset) button is pressed.
- 19 -
buttons simultaneously for about 3 seconds
", or " " will be displayed.
buttons simultaneously for about 3 seconds
" will remain.
buttons simultaneously for about 3 seconds when the
", " ", or " " will be displayed.
buttons simultaneously for about 3 seconds when
" will remain.
" and " "
"
" and
"