GE 15 Serie Manual Del Propietario E Instalación página 6

Aboutthefreshfoodcompartment shelves.
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
Half-Width Shelves
One end of the shelf rests on a molded
side-wall support; a bracket on the other
end hooks into a track on the rear
cabinet w-all.
TOremove, lift the shelf up at front, then
off the support and out of the track.
TOreplace, select desired shelf height.
With shelf front raised slightly, hook the
bracket's top lug into the track, then
lower the shelf onto the support.
NOTE: Theshelf to theright of the trackis
designedto hookinto the@t-hand slot,
theshelf to the left is designedto hook
into the leftqTand slot.
Full-Width Shelves
Some models have a steel wire sliding
shelf, a stationary tempered glass shelf or
two steel wire stationary shelves. These
shelves can be moved to another place
in the fl'esh food compartment.
The full-width sliding shelf has stop-locks.
When placed correctly on the shelf
supports, the shelf will stop before coming
completely out of tbe refrigerator and will
not tilt when you place food on it or
remove food from it.
To remove the full-width shelves,lift the
rear of the shelf and pull forward.
Toremovea full-width sheff when the fresh
food compartment door cannotbe opened
fully, lift tile rear of tile shelf, pull
forward and down, tilt the shelf and
take it out.
6