Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
DO NOT test your detector using an open flame. This may damage the detector or ignite
combustible materials and start a structural fire.
DO NOT stand close to the detector when the alarm is sounding. Exposure at close range may
be harmful to your ears.
Test the detector at least once a month.
C. LED indicators
Normal status:
Test status:
Silence mode:
Low battery status:
Fault status:
D. Silence mode
Silence mode should only be used if the source of the alarm is known and safe. Press the test
button (= centre front of detector) to set the silence mode. During silence mode, the red LED light
flashes once every 8 seconds. The detector is automatically reset after 10 minutes.
CAUTION
Before using the silence mode, identify the source of the smoke and be certain a safe condition
exists.
Green LED flashes once every 60 seconds.
Red LED flashes once every second.
Red LED flashes once every 8 seconds.
Red LED flashes once every 60 seconds and 1 beep every 60 seconds.
Red LED flashes once every 40 seconds and 1 beep every 40 seconds.
EN
04
Publicidad
