Sears KENMORE ELITE 665.1479 Manual De Uso página 18

Options
Sani Rinse
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard
184 for Residential Dishwashers. Certified
residential dishwashers are not intended for
licensed food establishments. Only sanitizing
cycles have been designed to meet the
requirements of the NSF/ANS1184
performance standard for soil removal and
for sanitization efficacy. There is no intention,
either directly or indirectly, that all cycles on
a NSF/ANS1184 certified dishwasher meet
the NSF/ANS1184 performance standard for
soil removal and for sanitization efficacy.
The Sani Rinse indicator indicates at the end
of the cycle whether the Sani Rinse option
was successfully completed. If the indicator
does not activate, it is probably due to the
cycle being interrupted.
Smart Dry
Turnsthe heat element on at the end of the
wash cycle. Use rinse aid with or without the
Smart Dry option for best drying results.
Plastic items are less likely to deform when
loaded in the top dish rack.
Top Rack Only
For added convenience, use for washing a
small load of dishes in the top rack to help
keep the kitchen continuously clean.
Can be selected
with
SmartWash ®HE
Pots & Pans
Normal Wash
Top Rack Only
Available with any
cycle except Quick
Rinse
Available with any
cycle
Cannot be used with
TurboZone ® option
What it does
Increases the main wash
temperature from 120°F
(49°C) to 140°F (60°C) and
the final rinse from 140°F
(60°C) to 155°F (68°C).
Turns the heat element on at
the end of the wash cycle.
Slightly faster wash for
smaller loads
Bottom Rack Only Available with any
For added convenience, use for washing a cycle
small load of dishes in the bottom rack to Cannot be used with
help keep the kitchen continuously clean. TurboZone ® option
_The maximum additional water used for any combination of options is 4.8 gal. (18.2 L).
Slightly faster wash for
smaller loads
Added time
to cycle
0:10 to 2:20
0:11 to 0:48
Saves up to
0:18
Saves up to
0:31
Added
Water **
Gallons
(Liters)
1 to 6.6
(4 to 25.1)
Delay Hours
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during off-peak
hours when possible.
To delay the start.
1. Select a wash cycle and options.
2. Press DELAY HOURS to choose the number of hours to be delayed.
3. Press START/RESUME.
NOTE: Anytime the door is opened for more than 5 seconds (such as, to add a dish), the Start/Resume button must be pressed
again to resume the delay countdown.
18